 |
      |
 |
|
|
|  |
|
The High-Power Subwoofer Module SAM-2
With the perfect equipment and workmanship for active subwoofer systems of the highest quality. The filters operate perfectly, for the subwoofer as well as the high-pass filter and a combination of systems of the highest quality is possible without any difficulties.
Active subwoofer module, 250W
High-power active module with extensive equipment: 24dB subsonic filter, var. low-pass filter: 50-150Hz (18dB), semiparametric bass boost (var. 30-50Hz midrange with boost up to 6dB, continuously adjustable), continuously adjustable phase control 0-180° for uncompromising room correction and an optimum set-up of your speakers, var. high-pass filter: 50-150Hz (12dB) for equalizing the bass frequencies of the satellite amplifier and the satellite speakers, ground lift switch of the studio technology against hum interference and various protective circuits (short circuit, overheating and DC voltage overload). The great power allows to perfectly drive enormous bass speakers with a diameter of up to 46cm, the sound and the workmanship are absolutely convincing.
The high-quality active high-pass filter of the SAM-2 with versatile adjustments can conveniently be used as a bass relief of the main speakers and for optimising the sound. However, a regulated pre-amplifier output (Pre Out) is required for this. This kind of output is partly present at high-quality separable full amplifiers (Pre Out/Main In) or automatically provided by pre-amplifier/power amplifier combinations or when using mixers. |
|
 |
| Vejl. excl. moms | DKK 2.239,20 |
| Vejl. incl. moms | DKK 2.799,00 |
|
|
Vejl. incl. moms
DKK 2.799,00
|
|
| TEKNISKE DATA: |
| Output power rms 4Ω | 200WRMS |
| Output power rms 8Ω | 125WRMS |
| Music output power 4Ω | 250WMAX |
| Music output power 8Ω | 180WMAX |
| THD at rms power | < 0.1% |
| Frequency range, full range | - |
| Frequency range, satellite | (var. 50-150Hz) - 20,000Hz |
| Frequency range, subwoofer | 20Hz - (var. 50-150Hz) |
| Output impedance | 4-8Ω |
| Input impedance | line: 20kΩ/high: 17kΩ |
| Max. input voltage | |
Line in | 8.4V mono/4.2V stereo |
High power in | 44V stereo |
| Max. power of high level input 4Ω | 2 x 480WMAX |
| Max. power of high-level input 8Ω | 2 x 240WMAX |
| S/N ratio | > 70dB |
| Power consumption, no load | 19VA |
| Power consumption, stand-by | 6VA |
| Stand-by activation time | approx. 7 minutes |
| Power supply | 230V˜/50Hz/300VA |
| Required mounting cutout | 155x340mm |
| Mounting depth w/o front panel | 85mm |
| Dimensions | 185x370x90mm |
| Weight | 4.9kg |
| |
|
|